Using manual grinders

1. Unscrew the adjustment-locking nut.
2. Remove the handle assembly.
3. Remove the locking peg.
4. Using the adjustment nut, slacken or tighten to reach the correct coarseness of grind.
5. Replace the locking peg.
6. Replace the handle assembly.
7. Replace the adjustment-locking nut and tighten.
8. Place coffee beans in the hopper.
9. Rotate the handle at a steady and fast pace.
10. Once the required quantity of coffee is ground, remove the drawer and use immediately.
11. If any coffee is left over, store it in a sealed container.
12. Enjoy.

back to top

Using non-adjustable electric coffee grinders

1. Remove the grinder top.
2. Place the coffee beans in the grinder; take care not to over fill.
3. Replace lid.
4. Plug the grinder into the electrical socket.
5. Switch on and using a pulsing action with intervals of about 5 seconds “on”, 5 seconds “off”, grind the coffee to the coarseness required.
6. Remember to give the grinder an occasional light shake between the “on” and “off” pulses.
7. Unplug grinder from the electrical socket.
8. Remove lid.
9. Use the ground coffee immediately.
10. If any coffee is left over, store it in a sealed container.
11. Enjoy.

back to top

Using adjustable electric grinders

1. Remove the grinder top.
2. Place the coffee beans in the grinder.
3. Replace lid.
4. Plug the grinder into the electrical socket.
5. Adjust the grinder to the coarseness required.
6. Switch on and wait until the coffee is ground into the container or coffee holder as appropriate.
7. Unplug grinder from the electrical socket.
8. Remove ground coffee container or coffee holder as appropriate.
9. Use the ground coffee immediately.
10. If any coffee is left over, store it in a sealed container.
11. Enjoy.

back to top